Anest Iwata Extreme Basecoat Paint Gun LPH-400LVX 5670

The Anest Iwata Extreme Basecoat Paint Gun is a productive tool that is compatible with 90%-95% basecoat colors. It can increase productivity when applying solvents or waterborne basecoats. It is also suitable for hot and dry conditions.

Key Features of the Anest Iwata Extreme Basecoat Paint Gun

• Tip Size: 1.3 or 1.4
• Air Consumption (CFM): 9.8
• Atomizing PSI: 16.0 (1.1)
• Air cap model: LVX
• 600 mL Plastic Cup, 700 mL or 1000 mL Cups sold separately

Points to Remember When Operating the Anest Iwata Extreme Basecoat Paint Gun:

• Recommended paint viscosity can vary depending on the paint and painting conditions
• Keeping the fluid output as small as possible will provide a better finish and fine atomization
• Set the spray distance at a range of 100-200mm for maximum transfer efficiency
• Hold the gun perpendicular to the work surface and move it in a straight, horizontal line; this will prevent uneven painting

To Clean the Paint Gun:

• Pour any remaining paint into a separate container and clean the fluid passages and air cap set; spraying thinner can clean the passages
• Clean each section with a brush soaked in a thinner and wiped clean with a rag
• Disassemble the fluid nozzle and fluid needle set

Some recommended products that are compatible with the Anest Iwata Extreme Basecoat Paint Gun are 3M PPS Adaptor Type 2 with a 16 mm female, 1.5 mm thread and Magnetic Spray Gun Holder that you can use in the spray booth or other convenient locations.

Instruction Manual