BendPak 72,000-lb. Cap. Mobile Column Lift System, Set of 4 PCL-18B-4

This PCL-18B mobile column lift system comes in a set of 4. When combined, the system lifts up to 72,000 lbs. Ideal for two-axle vehicles.

• 18,000-lb. individual column capacity / 72,000-lb. maximum system capacity
• Meets or exceeds the standards prescribed by ANSI/ALI ALCTV-2017
• Just three 30' cables are used leaving the front or back of the lift clear of cable obstructions
• Intuitive controls allow the lift to be fully programmed and controlled from any column
• Smart electronics feature self-diagnostics and self- calibration functions
• Sealed and enclosed linear potentiometers feature precision potentiometric output and high-frequency response for precise synchronization and communication of all columns through all cycles for precise, level lifting
• Height settings can be programmed for low ceiling shops

Options:

• Low Voltage(208-230/190V, 50/60HZ, 3-Ph)
• High Voltage (460/380V, 50/60HZ, 3-Ph)

NOTE: DO NOT attempt to lift half of a vehicle (the front or back only) with only 2 mobile lifts. Vehicles must be raised on an even plane at all times.

Specifications

• Lifting Capacity: 18,000 lbs. (8,165 kg)
• Overall Height (RAISED): 101" (2,565 mm)
• Overall Height (LOWERED): 146.5" (3,721 mm)
• Max. Lifting Height: 71.5" (1,889 mm)
• Overall Depth: 48.75: (1,238 mm)
• Overall Width: 45" (1,143 mm)
• Chassis Length: 32.25" (819 mm)
• Min. Lifting Fork Width: 9.5" (241 mm)
• Max. Lifting Fork Width: 35" (889 mm)
• Lifting Fork Length: 11.5" (292 mm)
• Turning Circle: 40" (1,016 mm)
• Column Weight: 1,450 lbs. (657 kg)
• Lifting Speed: 85 sec
• Shipping Weight per Column: 1,450 lbs. (657 kg)
• Shipping Dimensions per Column: 106" x 55" x 41"

*Shipping Information:

• Additional $80 charge for residential delivery.
• Forklift required to remove Lift from delivery truck.
• $100 Limited Access Fee for deliveries to schools.

Ships via Truck Freight. You will be contacted with final shipping charges.