Evercoat Dura Build Acrylic Primer Surfacer - Gray

Sands Easily with Minimal Shrinkage

The Evercoat Dura Build Acrylic Primer Surfacer, Gray is a fast drying, high build acrylic primer surfacer that fills grind marks easily and can also be used to correct sand scratches and other surface imperfections. A primer surfacer sands to an ultra fine finish and has minimal shrinkage.

You can apply the acrylic primer surfacer to the following substrates:

• Sanded OEM topcoats
• Body filler or putty
• Epoxy primer
• Self-etch primer
• Rigid plastics
• Polyester glazing putty
• Wood
• Properly prepared metal
• Fiberglass

Clean surface thoroughly before applying. For untreated steel, bare aluminum, and galvanized steel, it is recommended that you sand the surface with 180-220 grit sandpaper, clean surface well before applying the primer. For the pre-painted surface, we recommend that you featheredge with 80, 180, 220 grit sandpaper. Finish with 320 grit sandpaper on a random orbital sander. Clean thoroughly before applying the primer. For applying on top of body filler or putty, it is recommended that you sand using the 180-220 grit sandpaper.

How to Apply?

• Use a primer gun with 1.4 – 1.8 fluid nozzle/air cap
• Apply 2-3 medium wet coats and allow 5-10 minutes flash time between coats

Drying Time

• Sand-ready in 60 minutes
• When dry, sand with 400-600 grit sandpaper

Key Features of the Evercoat Dura Build Acrylic Primer Surfacer – Gray:

• Helps you fill grind marks, sand scratches and other minor surface imperfections
• You can sand it easily to an ultra-fine finish with minimum shrinkage
• Can be applied to OEM topcoats, body filler or putty, epoxy primer, self-etch primer, rigid plastics, fiberglass and more
• Available in 1 gallon & 1-quart sizes
• Gray

This item can only ship by ground within the Continental US.
Next Day or 2nd Day, AK & HI, & International delivery not available.

WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov.