If you are looking for a resin blend that helps in the repair of both fiberglass and SMC, then the USC All Resin Repair Resin is a good choice. The repair resin has quicker cure time and provides exceptional vertical hold. The special adhesion property of the USC All Resin Repair Resin gives you a structurally firm and problem-free repair. The repair resin is best used with cloth, mat, fiberglass, and tape.
Key Features of the USC All Resin Repair Resin:
- Provides excellent vertical hold due to its thick, non-sag formula. This greatly helps in the repair of side panels and trucks
- The repair resin delivers a tack-free finish due to its quick curing property
- Easy sanding property without clogging the sandpaper
- Durable, Rustproof, and Waterproof
- Cream hardener
- Available in 1 gallon cans
Technical Specifications
- Appearance as Packaged: Amber Opaque Viscous Liquid
- VOC: 384 g/l
- 1.6 g/l loss upon cure
- Weight Per Gallon (Density): 9.45 pounds (Average)
- Maximum Recommended Thickness (sanded): 1/8"
- Viscosity @ 77°F: 1280 cps (Average)
- Gel Time @ 77F: 7.0 - 10.0 minutes
- Shore "D" Hardness Values @ 24 hours: 70-75
- Sanding Time @ 77°F: 60 minutes (Average; depends on thickness of mass)
- Maximum Heat: 200° F for 30 minutes
WARNING: This product can expose you to chemicals including Styrene which is known to the State of California to cause Cancer and Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
• Thick, non-sag formula
• Rust and water proof
