Clamps
-
$5,269.99This package includes #7001 Universal Tram Gauge, #7200 Deluxe Centerline Gauge, #7300 Strut Tower Alignment Gauge,...
-
$129.99Great for getting over lips or edges. Drop-forged round wedge keeps the twist out of chain. Gripping Surf...
-
$309.99Perfect for small pick-up frame rails. Able to reach core support and upper sheet metal areas. Gripping S...
-
$204.99A tough clamp for both straight pull or right angle with an infinite twist capability. Mo-Grip™ surface has...
-
$184.99"Super" clamp gives maximum grip with screw & pull force. Deeper for more access. Gripping Surface: 2"...
-
$159.99Self-Tightening. The bodyman's right arm. It grabs 2¼" (57 mm) of metal, making it ideal for hard pulls on...
-
$131.99Duckbill clamp gets into small, narrow spaces. Grabs pinch weld. Anchor bolt turns. Gripping Surface: 1...
-
$169.99With 3 tons of capacity, the Corner Clamp conforms to the exacting standards of all Mo-Clamp products. Made from...
-
$164.99Self-Tightening. Wider tooth surface to grab more thin metal without tearing. Gripping surface: 2 1⁄4" wide, 1...
-
$209.99Screw clamp enables high clamp pressure with no slipping. Extremely safe. Gripping surface: 1 1⁄2"...
-
$149.99These heat-treated jaws reach around flanges and other obstructions to get a grip on hard-to-reach surfaces. Severe...
-
$144.99Plates included. Simply weld plate to surface, slide on clamp and pull. Gripping Surface: up to 3" wide....
-
$539.99Bar holes designed for three ways of pulling, using #4044 shackle and #4043 oval loop. Clamp has recessed pockets to...
-
$71.99The NAP allows pulls from any angle. Just put the bolt through a 1/2 " hole and pull. Use with #2100 or #2400...
-
$259.99New style features cross-hatch tooth pattern which holds well with less distortion of metal. Larger pull plate is...
-
$143.99For hard-to-hold pulls. Tack weld one of the reusable plates. Attach clamp and pull. Break tack weld with a...
-
$199.99Shallow duckbill grips with extra force for touch pulls. Works great on front/rear body panels. Gripping surface:...
-
$124.99This large C-Clamp will allow the drill bit to access deeper parts of the panel. To be used with the Dent Fix Spot...
-
$113.99360 degree self-tightening pull ring. Has 182 individual teeth for working in tight areas. ...
-
$150.99360 degree self-tightening pull ring. 1-5/8" wide grip. Removable multi-dire...
-
$176.991-1/4" wide grip with 2" deep throat. 360 degree self-tightening pull ring. Remova...
-
$134.991-1/8" wide jaw perfect for small narrow areas. Self-tightening with built in chain notch. ...
-
$134.99The Mo-Clamp "A" Clamp with pull ring - 0053 is excellent for gripping narrow seams and...
-
$394.99The Mo-Clamp "W" Clamp is the Super Clamp for the tough jobs. ...
-
$189.99The Mo-Clamp Long Nose Clamp is self-tightening and includes the original wedge...
-
$229.99The Mo-Clamp Baby Box Clamp - 0670 is self-tightening. Great for single-lip flanges and...
-
$259.99The Mo-Clamp Big Mouth Clamp - 0680 is self-tightening. A perfect solution for ...
-
$389.99Capacity 3 tons Design allows for angled and/or uneven pulls Can use all 5 different...
-
$334.99The Mo-Clamp 4-Way Pull clamp has recessed pockets to hold bolts stationary for...
-
$244.99The Mo-Clamp 3-Way Pull Clamp - 4030 has recessed pockets to hold bolts stationary for ...
-
$319.99The Mo-Clamp "G" Clamp helps you pull using various angles and makes pulling considerably easier. With a throat...
-
$141.99The reversible Mo-Clamp Mini-Bite with pull ring is designed to get around lips an...
-
$129.99This heavy duty clamp pulls one to eighteen pins with a maximum pull of 10,000 lbs. Spread your pulling force over a...
-
$139.20Designed to Progressively Pull Hea...
-
$171.99The Mo-Clamp Angle Bite Clamp - is a self-cleaning, self-tightening clamp with a gator tooth design and ...
-
$129.99The A™ Clamp grips narrow seams and ridges. Hardened steel cross-hatch teeth assure a secure pull. Excellent...
-
$154.99Spring loaded for easy opening. Includes Oval Loop for use with Slip Hook for easy hook-up. For light sheet metal...
-
$149.99Self-tightening. Small, light, versatile. Has a minimum of 1 1/2" (38 mm) throat clearance to reach around...
-
$299.99Spring-loaded operation makes clamp easier to use. Pivoting, gripping heads allow for a sec...
-
$256.99Spring-loaded operation makes each clamp easy to use. Mo-Grip surface and pivoting head allows for a secure grip on...
-
$349.99Spring-loaded operation makes each clamp easy to use. Mo-Grip surface and pivoting head allows for a secure grip on...
-
$199.99A must for pulling on box rails with welded-on bumper flanges. Reaches around protruding metal to get a grip on...
-
$239.99Multi-purpose clamp with gator teeth for sure, non-slip pulls on any lip. Use t...
-
$11.99Replacement plates for the Mo-Clamp Wider Tack-n-pull with pull plates #2444 Save when you buy 10 or more! ...
-
$17.99Replacement plates for the Mo-Clamp Wider Tack-n-pull with pull plates #2444 Save when you buy 10 or more! ...
-
$94.99Chain too long? Make it shorter! Chain to short? Make it longer! The Mo-Clamp Handy L...
-
$91.99Use two clamps side by side for more pull. Can be used with two #1300 Sill Hooks. ...
-
$89.99The Mo-Clamp Panel Puller is light and easy to use with a slide hammer or pulling post. ...
-
$149.99Design allows technician to pull wider areas from behind door posts, pillars and rocker panels. Also gives...
-
$75.99Design allows technician to pull wider areas from behind door posts, pillars and rocker panels. Also gives...
-
$91.99The Mo-Clamp Pull Ring - 1500 for the 2100 2MA Adapter Plate for unlimited body and frame pulls, such as fram...
-
$479.99The Mo-Clamp 2MA Multi-Adapter Pull Plate 2100 is designed for most foreign and domestic vehicles with Mac- P...
-
$1,744.99Will Hold Down Cars Equipped with Horizontal Pinch Welds ...
-
$87.99Bolt to surface for a 90-degree straight pull or use with the Mo-Clamp 3-Way Pull Clamp, a pair of ...
-
$254.99The versatile Multi-Angle Clamp permits pulling from any direction within a 180-degree arc. The multi-angle side...
-
$141.99The Mo-Clamp Narrow Bar with Single Claw - 4056 is great for bolting to a frame, unibody rail or to other pla...
-
$182.99Makes possible one- or two-directional pulling and can be used in a confined area. Gator teeth grip metal...
-
$178.99A bend of 30 degrees makes all the difference when hooking up this tough guy onto a frme rail and making...
-
$9.99Great for Spreading or Pushing Out Damaged Body Panels High impact p...
-
$639.99The Mo-Clamp Jumbo "G" Clamp - 5802 has a throat opening of 7 inches to get over, around and behind the damag...
-
$89.99Double your pulling power. Use the Mo-Clamp Pulley Block Adapter with the Mo-Clamp Pull Assembly to make a Sn...
-
$489.99Pivoting jaws on all tong clamps assure a secure grip across the entire gripping surface on pulls up to 5 tons. Made...
-
$474.99Pivoting jaws on all tong clamps assure a secure grip across the entire gripping surface on pulls up to 5 tons. Made...
-
$476.99Pivoting jaws on all tong clamps assure a secure grip across the entire gripping surface on pulls up to 5 tons. Made...
-
$369.99Designed to fit all Mo-Clamp vertical scales on all centerline gauges in our product line. Allows hanging of...
-
$233.99The harder it's pulled, the tighter it clamps. 3-ton clamp with serrated jaws that open up to 1-1/2"....
-
$136.991-1/4" wide grip reduces tearing stress. Deepest 360 degree clamp with a depth of 2-3...
-
$16.99Hold your panels in place when welding Door can be closed for alignment checks before welding due...
-
$84.99Use for pulls on floor sections and quarter panels Gator teeth ensure non-slip pulls on any lip...
-
$319.99Protects door openings during body pulls Unique corner clamp ...
-
$262.59Double jaw distributes loads over double the surface Solid steel construction for durability...
-
$74.99Fits slide hammers with 3/4 inch threads Attach the clamp, screw in the slide hammer, then p...
-
$99.99Extremely versatile Pulls angles without twisting. Pulls from both sides of ...
-
$84.99Pull plate allows direct side pull Ideal partner to the #2430 (3-Way Angle Pull Clamp.) ...
-
$84.99C-shaped jaw reaches around flanges Does straight pulls quickly 4 inch wide jaw ...
-
$146.59Combines 3 way and side pull clamps Most versatile of all clamps Does angle ...
Shop Favorite Brands
